Alliance Laundry Systems UTF75N - UniLinc Cycle Parameter Settings

Time Dry Cycle
Parameter Display Value Range
Back -
State Enable/Disable
Time 1-99 minutes (time dry cycle),
1-240 minutes (No Heat cycle)
Temperature No Heat, Very Low, Low, Me-
dium, High, 100-190°F
[38-89°C] (in 5°F increments)
Step Reversing on/off
Table 4
Auto Dry Cycle
Parameter Display Value Range
Back -
State Enable/Disable
Temperature Very Low, Low, Medium,
High
Auto Dry Target Moisture -5, -4, -3, -2, -1, 0, +1, +2, +3,
+4, +5
Step Reversing on/off
Table 5
Moisture Dry Cycle
Parameter Display Value Range
Back -
State Enable/Disable
Temperature Very Low, Low, Medium,
High, 100-190°F [38-89°C] (in
5°F increments)
Moisture Dry Target 0%, 1%, 3%, 5%, 7%, 10%,
15%, 20%, 25%, 30%, 35%,
40%
Step Reversing on/off
Table 6
Cool Down
Parameter Display Value Range
Back -
Cycle Cool Down Global/Cycle Specific
Temperature 70-110°F [22-43°C]
Time 1-15 minutes
Step Reversing on/off
Table 7
Reversing
Parameter Display Value Range
Back -
Cycle Reversing Global/Cycle Specific, Disable
Rotate Time No Heat: 5, 10, 20, 30, 45,
60, 90, 120
Very Low/Low/Medium/
High: 30, 45, 60, 90, 120,
240, 540
Stopping Time (Designs 3 and
5)
No Heat: 10, 15, 30, 45, 60,
90, 180, 360
Very Low/Low/Medium/
High: 6, 7, 8, 9, 10 (120, 170
and 200 pound models will
allow a range of 10-14)
Stopping Time (Design 6) No Heat: 3-7 (30, T30, T45,
55), 6-10 (50, 75), 8-12 (120,
170, 200), 15, 30, 45, 60, 90,
180, 360
Very Low/Low/Medium/
High: 3-7 (30, T30, T45, 55),
6-10 (50, 75), 8-12 (120, 170,
200)
Table 8
Modify Cycle Menu
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
34 Part No. 70549501ENR6