n/a = not applicable
- All cycles include the following 100°F [38°C] cool down period: 2 minutes
- Designs 3 and 5: All cycles with reversing on rotate for 30 seconds and pause for: 6 seconds (25-75 Models) or 10 seconds
(120-200 Models)
- Design 6: All cycles with reversing on rotate for 30 seconds and pause for: 3 seconds (30, T30, T45, 55 pound models), 6 seconds
(50, 75 pound models), 8 seconds (120-200 pound models).
- Cool down and reversing settings can be changed from what is pre-programmed from the factory.
- If machine does not have the moisture sensing option, the moisture sensing cycles in the table above are automatically changed to
Auto-Dry cycle type. Refer to Non-Moisture Sensing Cycle Chart.
* Models with G or T in the second digit
** Models with A, K, R or U in the second digit
*** Cycles 42-48 are disabled from the factory. These cycles may be enabled and customized.
Cycle Charts
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
62 Part No. 70549501ENR6
To Next Page
Loading...
