EasyManuals Logo

ALLIANCE 030 Series Installation

ALLIANCE 030 Series
85 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Heater Digit (Position 6)
M - Medium Electric
N - Natural Gas
P - Low Electric
R - Reduced Gas, Natural Gas (Eco Line)
S - Steam
Contact Information
If service is required, contact the nearest Factory Authorized
Service Center.
If you are unable to locate an authorized service center or are un-
satisfied with the service performed on your unit, contact the
source from which you purchased your unit.
When calling or writing about your unit, PLEASE GIVE THE
MODEL AND SERIAL NUMBERS. The model and serial num-
bers are located on the serial plate. The serial plate will be in the
location shown in Figure 1 .
Date Purchased ______________________________
Model Number ______________________________
Serial Number _______________________________
Please include a copy of your bill of sale and any service receipts
you have.
WARNING
To reduce the risk of serious injury or death, DO NOT
repair or replace any part of the unit or attempt any
servicing unless specifically recommended in the
user-maintenance instructions or in published user-
repair instructions that you understand and have the
skills to carry out.
W329
1
1
TMB2721N_SVG
NOTE: An alternate serial plate is located on the front of the machine on the inside of the loading door hinge.
1. Serial Plate
Figure 1
If replacement parts are required, contact the source from where
you purchased your unit.
Introduction
©
Published by permission of the copyright owner -
DO NOT COPY or TRANSMIT
16 Part No. 70686701ENR4

Table of Contents

Other manuals for ALLIANCE 030 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ALLIANCE 030 Series and is the answer not in the manual?

ALLIANCE 030 Series Specifications

General IconGeneral
BrandALLIANCE
Model030 Series
CategoryDryer
LanguageEnglish

Related product manuals