Transport, storage and disposal
4.4 Removing the preservative
Only necessary for pumps treated with preservative
WARNING
Risk of poisoning from preservatives and cleaning agents
in the foodstuffs and drinking water sector!
Only use cleaning agents which are compatible with the
pumped liquid (→ 9.2.6 Cleaning agents, Page 37).
Completely remove all preservative.
NOTE
High water press ure or spray water can damage bearings!
Do not clean b earing areas with a water or steam jet.
NOTE
Damage to seals due to wrong cleanin g agents!
Ensure the cleaning agent does not co rrode the seals.
1. Choose the cleaning agent according to the application.
(→ 9.2.6 Cleaning agents, Page 37).
2. Dispose o f cleaning agents in accordance with local regu-
lations.
3. For storage times in excess of 6 months:
– Replace the elastomer parts m ade of EP rubber
(EPDM).
– Check all elastomer pa rts (O-rings, shaft seals) for
proper elasticity and replace them if necessary.
4.5 Disposal
Plastic parts can be contaminated by poisonous or radioac-
tivepumpedmediatosuchanextentthatcleaningisinsuf-
ficient.
WARNING
Risk of poisoning and environmental damage by the
pumped medium or oil!
Use personal protective equipment when carrying ou t any
work on the pump.
Prior to the disposal of the pump:
– Catch and dispose of any escaping pumped medium
or oil in accordance w ith local regulations.
– Neutralize residues of pu mped medium in the pump.
– Remove any preservative (→ 4.4 Removing the
preservative, Page 13).
Remove any plastic parts and dispose of them in accor-
dance with local regulations.
Dispose of the pump in accordance with local regu lations.
160-282/0 – 550 154 BA-2017.03 en-US NIT series 13
To Next Page
Loading...
