Alma FLEXICOMPT AUTONOME+ - Use the Flexicompt Autonome+: User Mode

FORM DOC 120 A
MU 7033 EN M
FLEXICOMPT AUTONOME+
Page 10/42
This document is available on www.alma-alma.fr
6 USE THE FLEXICOMPT AUTONOME+: USER MODE
Visualisa.
Connect
Metering
Supervisor
Interfaces
Available metering off
The FLEXICOMPT AUTONOME+ is on metering between the first command level after
initialization or resetting the current volume to zero, and resetting the current volume to zero.
The displayed volume depends on the configuration set in METROLOGICAL mode. A pictogram at
the upper left of the screen, indicates Vm for volume at temperature, or V15/V20/Vb for a volume
converted to the reference temperature.