Alma FLEXICOMPT AUTONOME+ - Connected Features and Supply of the Flexicompt Autonome; Connected Functions

FORM DOC 120 A
MU 7033 EN M
FLEXICOMPT AUTONOME+
Page 6/42
This document is available on www.alma-alma.fr
The FLEXICOMPT AUTONOME+ has five keys:
Lights the display during 10 seconds
Lighting is inhibited when Wi-Fi is enabled
MODIF
Normal mode: back to previous quantity
Metrological mode: increment the flashing figure when imputing a value or return
to previous menu
SELECT
Normal mode, metering off: select the menu
Normal mode, metering on: display the values (immediate flow, temperature)
Metrological mode: select the figure to be modified or select the menu
VALID
Normal mode: validate the selected menu or value
Metrological mode: validate the displayed value or the selected menu
In case of default: acknowledge the default
RESET
The key is active when the UNI-2 is autonomous. Reset the volume to zero and
record the data of the last measurement
Reset the display when entering data
2 CONNECTED FEATURES AND SUPPLY OF THE FLEXICOMPT AUTONOME+
FLEXICOMPT AUTONOME+
Charging
Between
100% and
40%
Between
40% and
10%
Less than
10%
Metering
On * On On Off
Wi
-
Fi
On On Off Off
Bluetooth
On On On Off
GPS
On On On Off
* Charge batteries outside potentially explosive area
Wi-Fi cannot work with Bluetooth or GPS
The Wi-Fi network name and password cannot exceed 10 characters. The allowed
special characters are + and -
2.1 Connected functions
The wireless connection enables the FLEXICOMPT AUTONOME+ to communicate with a
PC/tablet/portable device
The connected functions of the FLEXICOMPT AUTONOME+ are:
• Incoming data flow processing
• Recovery of parameters
• Recovery of maintenance information
• Geo-tracking of each measurement, the instantaneous position of the FLEXICOMPT
AUTONOME+
• Recovery of the clock