FORM DOC 120 A
MU 7033 EN M
FLEXICOMPT AUTONOME+
Page 11/42
This document is available on www.alma-alma.fr
6.1 Menu Metering
The manual recording sequence starts at the end of measurement by pressing RESET. The last measurement data is then recorded
and the volume is reset.
Choose product
...
0000000
SAVING
UNLE-LS
703
L
Press RESET to record the last
measurement and to reset the volume
GASOIL
0
L
UNLE-LS
0
L
RESET
Volume
...
6
L
703
L
For the automatic recording sequence, the time-out is set in METROLOGICAL mode (menu
Auto Save
)
At the beginning of measurement, appearance of flowrate resets the volume. The last measurement data is automatically recorded at
the end of measurement, at zero flow and when the time-out is up.
Flow SAVING
0000000
Appearance of flowrate resets the volume Volume
...
UNLE-LS
703
L
6
L
703
L
The record of the last
measurement is made at
the end of time-out
Time-out
Choose product
...
GASOIL
0
L
UNLE-LS
0
L
To Next Page
Loading...
