FORM DOC 011 A
MU 7033 EN M
FLEXICOMPT AUTONOME+
Page 35/42
This document is available on www.alma-alma.fr
8.4.2 Replacement of the battery
Proceed to the substitution of the battery and respect polarization (3.6V Lithium
AA battery). See maintenance sheet FM 8014.
8.4.3 Assembling the cover
Put the sheet back on the battery and make sure it‘s well-positioned in the base
holder
Put back the holder and the top cover
Screw the 4 screws
9 DRAWINGS AND PART LIST
The drawings below present the FLEXICOMPT AUTONOME+ in MID and not MID versions
(PPV077 DFV077). According to customers' needs, it is equipped with:
An upstream straight sleeve with API coupler
An upstream 15° bent sleeve.
To Next Page
Loading...