FORM DOC 011 A
MU 7033 EN M
FLEXICOMPT AUTONOME+
Page 31/42
This document is available on www.alma-alma.fr
8.3 2DLA01-spacer
8.3.1 Removing the upstream coupling
Remove the seal* from the upstream end of the threaded rod (29)
Unscrew the screw (34) and remove the lead seal cup (33)
Unscrew the nut (30) from the threaded rod (29) and remove the washers (31)
and (32)
Unscrew the 3 screws (18)
Remove from the 2DLA01-spacer (15) the API coupler set (36) with handle seat
and handles (17)
8.3.2 Removing the 2LA01-spacer from the UNI-2
Remove the 2 seals* from the screws of the UNI-2
Unscrew the 4 CHC screws of the UNI-2
Carefully lift up the UNI-2 to find the terminal block B2. Wires are long enough to
put the UNI-2 near nearby
Remove both batteries
15
18
29
34
17
Positioning the API coupler
30
31
32
33
36
To Next Page
Loading...