FORM DOC 120 A
MU 7033 EN M
FLEXICOMPT AUTONOME+
Page 5/42
This document is available on www.alma-alma.fr
The optional functions are available:
The FLEXICOMPT AUTONOME+ can manage the product temperature. In that case, it shows
volume in metering conditions or volume converted to the reference temperature;
It can be associated to a CTD+. This option is used to transfer measurements results to the
CTD+ thanks to an infrared communication between the FLEXICOMPT AUTONOME+ and the
CTD+. The data can be downloaded to a computer with a USB cable or to the printer kit. The
metrological parameters file and the configuration file of the FLEXICOMPT AUTONOME+ can
be uploaded separately in order to make an easier monitoring of the instrument (periodic
inspection, identification and diagnosis). CAUTION the CTD+ is not an ATEX device.
The FLEXICOMPT AUTONOME+ has one display:
Meaning of the pictograms displayed in the upper right of the screen:
Bluetooth
Wi-Fi
GPS
Battery
blinking steady blinking with
signal
strength
10
charge
level
OFF ON Connected OFF Disconnected Connected OFF ON
without
position
ON
position
OK
Charging Battery
is full
charged
NOTE 1: Bluetooth and Wi-Fi connections are exclusives.
NOTE 2: To save the battery charge, if the Bluetooth or Wi-Fi connection is released if it’s not
successful within two minutes. If the Bluetooth or Wi-Fi connection is successful, it remains active
for 10 minutes.
Display of the alarm
Volume indication:
- Vm: Volume in metering conditions
- V15 or V20 (according to the
chosen system): Volume converted
to the reference temperature
Flow
Pictograms:
- Bluetooth or Wi-Fi
- GPS
- Battery
Product temperature
Volume unit
Volume
Name of the
product
Date and time
To Next Page
Loading...
