ALTAI A8n - Page 29

To Next Page

To Previous Page

Altai A8n (ac) Series Super WiFi Base Station

Configuration Guide

Station Association Requirement [Optional] – Specify and additional

requirement on Signal Strength to Noise Ratio (SNR) for associated

clients.

Reject Station Association if

SNR less than X dB

denote the minimum SNR level which allow

clients to associate; You can select any

integer between 0dB and 100dB; 0 denotes

as disable; 0 is default setting

Disassociate Station if SNR

drops more than Y dB for

consecutive Z packets

Y denotes the SNR tolerance; Z denotes the

number of consecutive packets their SNR

are below the difference of X - Y.

Notes:

- Example for Station Association Requirement with the

following settings:

Reject Station Association if SNR less than 30 dB (X = 30);

Disassociate Station if SNR drops more than 20 dB for

consecutive 10 packets (Y = 20; Z = 10)

Consequence:

AP accepts the clients to associate if the SNR of packets from

the clients is high than (>) 30dB;

AP kicks out the associated client if the SNR of 10 consecutive

packets is below (<) 10 dB (30 dB – 20 dB)

3. Click Submit

4. Click Save & Apply