ALTAI A8n - 6.3. Status > Radio0(2.4 G)

To Next Page

To Previous Page

Altai A8n (ac) Series Super WiFi Base Station

Configuration Guide

Noise Level – indicate the noise level in terms of dBm of operating

channel

Transmission Power – indicate the total transmission power of Radio 1

Transmit – indicate the traffic and instant throughput of transmission on

Radio 1

Receive – indicate the traffic and instant throughput of receive

operation on Radio 1

Mode – indicate operating mode of Radio 1

WLANs - indicate the number of operating WLAN on Radio 1 (AP mode

and Repeater Mode only)

Clients - indicate the number of clients that Radio 1 servers currently

(AP mode and Repeater mode only)

Connection – indicate connection status between Radio 0 and remote

AP (Station mode only)

AP SSID – indicate the SSID that station associates with (Station mode

only)

AP SNR – indicate received SNR from remote AP (Station mode only)

Busy – indicate busy of operating channel

6.3. Status > Radio0(2.4G)

6.3.1. Status > Radio0(2.4G) > Status

Figure 85 – Radio 0 Status (detail)