90
Altai A8n (ac) Series Super WiFi Base Station
Configuration Guide
Altai Technologies Ltd. All rights reserved
7.4.2. Ping Watchdog
Ping watchdog is mechanism that A8n (ac) reboots itself if it fails to
communicate (ping) to target host for serval time.
Figure 99 – Ping Watchdog
Enable ping watchdog
1. Go to Tools > Watchdog > Ping watchdog
2. Click Enable Ping Watchdog to enable this function
3. Type in IP address of target host in IP Address To Ping
4. [Optional] Specify interval between each ICMP request in Ping
Interval; 300 is default setting
5. [Optional] Specify delay time of each ICMP request in Startup Delay;
300 is default setting
6. [Optional] Specify fail tolerant in Failure Count to Reboot; 3 is default
setting
7. Click Submit
8. Click Save & Apply
To Next Page
Loading...