malletKAT User Manual (ver.07-17-18)
While holding down the Edit footswitch, scroll through the Global Auxiliary screens to the pad you wish to
reset.
Release the Edit footswitch. The above screen should remain.
Tap the pad to reset it. (In this example, you would tap the G-natural in Octave Group D (notes C1 to B1 –
see Octave Group definitions earlier in this section)
Individual Pad Training slot C is now reset.
To Reset all Individual Pad Training Slots, you must reinitialize the instrument.
Global Auxiliary Shortcut #80
malletKAT Express
Auxiliary Editing Screens require pressing the Edit Footswitch and Sustain 1 pedal at the same time (See Section
4.1.1(https://alternatemode.com/online-docs/malletkat/#malletkat-express-accessing-editing-functions)
)
Viewing and Manually Adjusting your Pad Training results:
After training, you can both view and manually adjust values recorded from each Octave Group or Individually
trained pad.
ALL training results share the same Global Auxiliary Screen (#80). To scroll through the different results, use the
Forward/Backward pads until the second line is blinking. Then use the Increment/Decrement pads for scrolling.
To manually make changes to the training results, use the Forward/Backward pads until the Low or High training
value is blinking. Then change the values with the Increment/Decrement pads.
If you globally trained your instrument, all five Octave Groups (A-E) will have the same Low/High level
settings. Remember that if you make manual changes here, you will need to adjust each octave separately. The
Octave Groups are explained in detail earlier in this section.
Any unassigned Individual Pad Training slots will be listed with levels of “—”
29 / 109
To Next Page
Loading...
