malletKAT User Manual (ver.07-17-18)
malletKAT Express
Auxiliary Editing Screens require pressing the Edit Footswitch and Sustain 1 pedal at the same time (See Section
4.1.1(https://alternatemode.com/online-docs/malletkat/#malletkat-express-accessing-editing-functions)
)
BANK SELECT
Parameters = Enable, Disable
You can choose to disable BANK Change Commands in your malletKAT Pro. This will prevent any Bank
Messages from being sent to your sound source.
Global Auxiliary Shortcut #11
malletKAT Express
Auxiliary Editing Screens require pressing the Edit Footswitch and Sustain 1 pedal at the same time (See Section
4.1.1(https://alternatemode.com/online-docs/malletkat/#malletkat-express-accessing-editing-functions)
)
BEEPER
Parameters = On/Off
You can turn on or off the internal beeper that is heard whenever you are editing or changing Kits. Use the
INCrement or DECrement pads to change this setting.
Global Auxiliary Shortcut #10
malletKAT Express
Auxiliary Editing Screens require pressing the Edit Footswitch and Sustain 1 pedal at the same time (See Section
4.1.1(https://alternatemode.com/online-docs/malletkat/#malletkat-express-accessing-editing-functions)
)
BREATH CONTROLLER TRAINING
The response of the breath controller may be set at this screen by “training” the breath controller. Your first step
is to adjust the trim pots on the BC2 itself. To Train the breath controller, strike any pad one more time and
release the Edit . The malletKAT Pro will sound a continuous beep. You should respond by blowing through the
breath controller and then hitting a pad (while still blowing). The malletKAT PRO will again sound a continuous
beep. You should now hit a pad again while blowing. The breath controller is now trained.
The Breath Controller was removed in the malletKAT 8. It is still listed here for reference to older malletKAT
instruments.
Global Auxiliary Shortcut # 46-49
malletKAT Express
Auxiliary Editing Screens require pressing the Edit Footswitch and Sustain 1 pedal at the same time (See Section
4.1.1(https://alternatemode.com/online-docs/malletkat/#malletkat-express-accessing-editing-functions)
)
84 / 109
To Next Page
Loading...
