Alto-Shaam COMBITHERM CTC Series - Weekly Maintenance and Inspection

42 • MN-35949 • Rev 04 • 06/16 • Combitherm® CT PROformance™ Series • Technical Service Manual
Cleaning and Maintenance — CTP
Weekly Maintenance
On a weekly basis, the heat exchanger on gas
models and convection elements on electric models
must be inspected.
•
Remove all wire shelves from inside the
appliance.
•
Remove le side rack from the oven cavity.
•
Loosen the thumb screw(s) on the fan panel and
swing the fan guard cover plate toward the back
of the oven.
•
Inspect the heat exchanger on gas models for
signs of grease and/or carbon buildup, scale
buildup, and any signs of major deformation.
Refer to images A and B.
•
Inspect that the  ue pipe seal is tight and intact.
Refer to image C.
•
Inspect the convection elements for signs of
cracking, grease and/or carbon buildup, scale
buildup, and any signs of major deformation.
Refer to image D.
A
B
D
C
Weekly Maintenance