44 • MN-35949 • Rev 04 • 06/16 • Combitherm® CT PROformance™ Series • Technical Service Manual
Cleaning and Maintenance
Unit Information
Business Name: ________________________________________
Model Number: ________________________________________
Serial Number: _________________________________
Weekly Inspection Start Date: _________________________________
Weekly Inspection Checklist
Inspect - Oven cavity lamp
Inspect - Oven cavity for signs of grease/carbon buildup
Inspect - Behind the fan panel inside the oven cavity for signs of grease/carbon buildup
Inspect - Behind the fan panel inside the oven cavity for signs of scale buildup
Inspect - The heat exchanger for any signs of major deformation. If yes, immediately remove from service and take corrective
action steps.
Inspect - The heat exchanger for any loose/disconnected pipes or flanges. If yes, immediately remove from service and take
corrective action steps.
Inspect - Convection elements for signs of cracking, deformation, or damage
Clean ventless hood grease filters
Employee initials
Component Failure & Replacement
List details of the failure(s) next to the day they occurred. Leave blank if components are working properly.
Week 1
Week 2
Week 3
Week 4
G
G
E
EG Gas units only Electric units only
Weekly Inspection
To Next Page
Loading...
