Alto-Shaam COMBITHERM CTC Series - Classic, Gas: no Convection Heat

MN-35949 • Rev 04 • 06/16 • Combitherm® CT PROformance™ Series • Technical Service Manual • 85
Troubleshooting
Classic, Gas: No Convection Heat
Is the convection
fan motor spinning?
Is the N6 oven temperature
probe below the set point?
Is the burner igniting?
The appliance is heating properly.
No
Yes
See "High Speed
Convection Motor is Not
Spinning".
No
Yes
No
Yes
Troubleshoot "No Ignition
On A Call For Heat".
The convection element contactors
will not be energized until the N6 oven
temperature probe is below the set point.