1-40 American-Lincoln
MPV 60
LP SAFETY PRECAUTIONS
WARNING
Keep cigarettes, sparks, and open flame away when working on LP equipment. When inspecting for gas leaks or
when LP tanks are present.
WARNING
Check all components for proper operation. Replace LP components when needed. Never by-pass defective
safety components.
WARNING
Check routing of all LP hoses. Keep them away from sharp edges, exhaust manifolds, or other hot surfaces.
Check for signs of abrasion or deterioration.
WARNING
Check for gas odor before and during starting operations.. If gas odor is noticed, stop and check for leaks or
component malfunction.
WARNING
Make sure LP tank is free of dents or gouges.
WARNING
Make sure service coupling is clean and free of damage. Make sure service coupling of tank matches machine
service coupling.
WARNING
Keep the engine properly tuned.
WARNING
Make sure the LP tank matches the fuel system.
WARNING
Make sure the LP tank is securely mounted on the machine with the retainer bracket clamping the tank and with
the locating pin in position.
WARNING
Park the machine in a shaded, cool area when not in use.
WARNING
Keep the LP tank service valve closed when the tank is not in use.
WARNING
Never overfill the LP tank. Fill the LP tank to the recommended weight stamped on the tank.
WARNING
Use care in handling LP tanks. Never drop or drag them.
WARNING
Always store and transport LP fuel tanks with the safety relief valve in the “UP” position.
WARNING
Avoid contact with the LP fuel to avoid frostbite.
WARNING
When the machine is to stand unused for a period of time (overnight), park the machine in a designated area. Shut
off the service valve at the tank and operate the engine until the remaining fuel is consumed. Turn off the ignition
switch.
To Next Page
Loading...
