Altronic DE-3000 - Page 12

DE-3000 IOI 7-17
All rights reserved © ALTRONIC, LLC 2017
12
9.6 Whenever a programmed servicemeter interval has expired, a
*
character will be
displayed at the end of the STATUS word on the top line of the HOME screen.
Digital control output #7 will turn ON when any service meter interval has ex-
pired. This output can be used to trigger a horn or light or to initiate a service
call. The servicemeter will show the hours remaining until a scheduled service
function is required. When a service function is overdue, the hours left will
display 0. To access the servicemeter messages, press the Menu key from the
Home screen, and then select Hourmeter Functions.
F1
PRESS TO
VIEW
MESSAGE
RUNNING
HOURMETER/RESET TIME
MESSAGE NUMBER: >00
TOTAL HOURS: 8971
OPERATING HOURS
↑
UNITS
PRESS TO
CHANGE
NUMBER
RUNNING
HOURMETER/VIEW/CLEAR
MESSAGE NUMBER: ~00
TOTAL HOURS: 8971
OPERATING HOURS
↑
UNITS
PRESS TO
CHANGE
NUMBER
RUNNING
HOURMETER/VIEW/CLEAR
MESSAGE NUMBER: ~01
HOURS LEFT: 100
OIL CHANGE REQUIRED
STATUS* RUNNING
SPEED 1000 RPM
SUCTION 102.3 PSIA
DISCHARGE 300 PSIG
HOURMETER / SERVICE
MESSAGE NUMBER: ~00
TOTAL HOURS: 8971
OPERATING HOURS
HOURMETER / SERVICE
MESSAGE NUMBER: ~01
HOURS LEFT: 100
OIL CHANGE REQUIRED