Altronic DE-3000 - User Manual

1
Operating Instructions
DE-3000 Series Configurable Safety Shutdown and Control System
with Graphing Capabilities
Form DE-3000 IOI 7-17
SOME FEATURES IN THIS MANUAL ARE ONLY APPLICABLE TO
DE-3000 FIRMWARE DATED 2014 OR LATER, INCLUDING:
•
OEM Engine Control
•
Lube No-Flow/Lube Monitoring
•
Linear Ramp Control
•
Cool-down
•
Integrated output timers on digital output channels #5 and #13
•
Multi-Start

Summary

Overview

Display Module

Power Supply Module

Terminal Module

Mounting

Wiring

System Component Wiring

Diagrams and instructions for connecting system components.

Power Wiring

Instructions for connecting power to the system.

Sensor Wiring Discrete Inputs

Wiring procedures for discrete sensor inputs.

Analog Sensor Wiring

Guidelines for wiring analog sensors.

Output Switch Wiring

Wiring details for output switches.

RS-485 Communications Wiring

Wiring instructions for RS-485 communication ports.

Hazardous Area Operation

Keypad Description

Understanding the Home Screens

Control Screen

Details on accessing and using the control screen.

Shutdown or Fault Status Screens

Test Mode Screens

Viewing;Editing the Configuration Using the Menu Mode

Data Logging and Communication Options

Communications Parameters

Settings required for PC/PLC communication.

Automatic Call Out Using an External Modem

Configure the modem using the monitor program:

Steps to configure the external modem for call outs.

Alarm Function

Overview

General explanation of the alarm function.

Function

How the alarm condition is displayed and managed.

Troubleshooting

Auto Start Option

State 1: Begin Auto Start Sequence Timed Delay Period

Details the initial timed delay phase of the auto start sequence.

State 2: Begin Cranking

Describes the cranking phase of the auto start sequence.

State 5: Starting Fuel and Ignition On

Enabling fuel and ignition for engine start.

State 6: Engine Started

Engine start sequence upon reaching speed.

State 7: Engine Running Unloaded Warmup

Engine running at idle speed during warmup phase.

State 8: Engine Running PID Output Control Starts

PID control outputs adjust based on programmed configuration.

OEM Engine Control

Selecting a Control Strategy

Suction pressure control

Discharge pressure control

Engine Manifold pressure control

Calibration of Transducers

Password Protection

Password for the Menu

Setting and managing the password for menu access.

Password for the Next Key (PID Parameters)

Setting and managing password for PID parameter modification.

Programming Instructions

Description

Installation

Steps for installing the terminal program software.

Program Operation

How to operate the programming software.

Configure DE-3000 Device

Procedures for configuring the DE-3000 device.

Program Global Variables

Settings for global variables in the program.

G. Terminal Board Tab

Program Channels form appears

Interface for programming individual channels.

Program Control Values form appears

Settings for analog output control values.

Program Home Screen Values form appears

Program View Process Screen form appears

Display Configuration form appears

Download

Downloading configuration files to the device.

Data Logging

Configure DE-3 x00 Modem

Configuring the modem connected to the DE-3000.

Altronic DE-3000 Specifications

General

Category	Control Systems
Operating Voltage	10-30 VDC
Number of Channels	8
Communication	RS-485
Housing Material	Aluminum
Input Type	Digital
Output Type	Relay