Amada UNIFLOW 4 REMOTE - Page 155

APPENDIX D: COMMUNICATION CODES
UNIFLOW
®
4 PULSED HEAT CONTROL
990-908 D-17
54 IDLEOFF3,
55 IDLEWARM3
56 POSTHEAT_HIGHLIMIT
57 PREHEATDELTA_TOOHIGH
58 REFLOWDELTA_TOOHIGH
59 HEATINGTOOSLOW
60 THERMOSTATTOOHOT
6 Bytes Total
PROFILE “DR” Read ProfileNum (Profile number read: 01 - 63) 2 Bytes
, 1 Byte
PreheatTemp (Preheat temperature: 060 - 300) 3 Bytes
, 1 Byte
ReflowTemp (Reflow temperature: 060 - 600) 3 Bytes
, 1 Byte
Cool1Temp (Cool1 temperature: 025 - 300) 3 Bytes
, 1 Byte
PreheatTime (Preheat time: 000 – 999) 3 Bytes
, 1 Byte
Rise2Time (Rise2 time: 00 – 99) 2 Bytes
, 1 Byte
ReflowTime (Reflow time: 000 – 999) 3 Bytes
, 1 Byte
BaseTemp (Base temperature: 025 – 300) 3 Bytes
1 Byte
PostheatTemp (Postheat temperature: 025 - 600) 3 Bytes
, 1 Byte
Cool2Temp (Cool2 temperature: 025 - 300) 3 Bytes
, 1 Byte
IdleTemp (Idle temperature: 025 - 100) 3 Bytes
, 1 Byte
BaseTime (Preheat time: 000 – 999) 3 Bytes
, 1 Byte
PostheatTime (Postheat time: 000 – 999) 3 Bytes
, 1 Byte
Rise1Time (Rise1 time: 00 – 99) 2 Bytes
, 1 Byte
GRAPH Time Span (000-999) 3 Bytes
1 Byte
Head Up Delay (000-999) 3 Bytes
1 Byte
, 1 Byte
FineRate (00 – 99) 2 Bytes
, 1 Byte
Preheat Reflow Control (0=TIME, 1=TEMP) 1 Byte
, 1 Byte
Preheat Delta Temperature (00 – 99) 2 Bytes
, 1 Byte
Reflow Delta Temperature (00 – 99) 2 Bytes
, 1 Byte
PID Control (100 – 269) 3 Bytes
, 1 Byte