CHAPTER 4: OPERATING INSTRUCTIONS
UNIFLOW
®
4 PULSED HEAT CONTROL
990-908 4-5
GRAPH Screen Detail #3
The three lines at the bottom of the
screen are:
The lowest line indicates the
time length of each process
cycle of the current Profile.
The second line from the
bottom of the screen indicates
the temperature for each
process cycle of the current
Profile.
Close-UP View
The third line from the bottom is a status or alarm message. This line will either display
the Control status, present process cycle step or an alarm message.
GRAPH Screen Detail #4
The numeric value in the upper left of
the screen is the length of time
represented by the X-axis of the graph.
Close-UP View
To Next Page
Loading...