CHAPTER 3: USING PROGRAMMING FUNCTIONS
UNIFLOW
®
4 PULSED HEAT CONTROL
3-26 990-908
Pressing the 3 key will alternately select either RS232 or RS485 communications. Default value is
RS232.
BAUD RATE
The 2 key on the COMMUNICATION menu
brings up the BAUD RATE screen. Use
the keypad to select the required data
transfer rate, from 1200 to 38.4K baud.
The Default value is 38.4K.
< BAUD RATE >
1. 1200 5. 19.2K
2. 2400 6. 38.4K
3. 4800
4. 9600
Number Select, Page, Graph / Data
I.D. NUMBER
Press the 4 key to bring up the RS485 ID
NUMBER
screen.
Use the keys to adjust. Unit IDs
range from 01 – 31. The Default ID
value is 01.
< RS485 ID NUMBER >
RS485 Unit ID Number : 01
Number Change, Adjust, Graph / Data
To Next Page
Loading...