CHAPTER 3: USING PROGRAMMING FUNCTIONS
UNIFLOW
®
4 PULSED HEAT CONTROL
990-908 3-31
SET TO DEFAULTS
Press the 6 key to bring up the RESET TO
DEFAULTS
screen. With this screen, you
may reset all user-settable parameters
including all the settings in all 15 profiles
to the default settings.
CAUTION: pressing
1 on this screen
will reset all settings. Press the
2 key to
exit this screen without resetting to
default. If SYSTEM SECURITY is ON
defaults cannot be reset.
< RESET TO DEFAULTS MENU >
DO YOU WISH TO RESET ALL PARAMETERS TO
THEIR SYSTEM DEFAULT VALUES?
1. YES 2. NO
Number Select, Page, Graph / Data
If you press the COUNTERS, or HEATING RATE keys while this screen is displayed, this function will be
aborted.
SYSTEM DEFAULTS SET
If the 1 key was pressed on the
RESET TO
DEFALUTS
screen, this screen will be
displayed to confirm the defaults were
reset.
< SYSTEM DEFAULTS SET >
ALL PROFILE AND SYSTEM PARAMETERS HAVE
NOW BEEN SET TO THEIR DEFAULT VALUES.
Page, Graph / Data
LANGUAGE
Press the 7 key to bring up the
LANGUAGE screen. With this screen, you
may select the screen language to either
English by pressing the
1 key or to
German by pressing the 2 key.
If you press the COUNTERS, or HEATING
RATE
keys while this screen is displayed,
this function will be aborted.
< LANGUAGE >
1. LANGUAGE : ENGLISH
2. SPRACHE : DEUTSCH
Number Select, Page, Graph / Data
To Next Page
Loading...