Amada UNIFLOW 4 REMOTE - Profile Lock; System Lock; Profile Tuning Lock; Copy Profile

CHAPTER 3: USING PROGRAMMING FUNCTIONS
UNIFLOW
®
4 PULSED HEAT CONTROL
3-30 990-908
Enter a user-selected seven-digit (or less)
p
assword, using the keypad. When you
enter the password, followed by pressing
the cursor key, the OFF indication on
the SYSTEM SECURITY screen will
change to
ON.
If you press the
GRAPH, COUNTERS, or
HEATING RATE keys during entry of a
p
assword, this function will be aborted.
< CHANGE PASSWORD >
PASSWORD : *******
Enter NUMBERS followed by the arrow
Page, Setup / Data
Once you have returned to the graph or data screens, you can only unlock system security by entering
the password again via the
CHANGE PASSWORD screen.
PROFILE LOCK inhibits you from modifying any reflow parameters and from selecting different profile
schedules.
SYSTEM LOCK prevents you from making changes to menu items.
PROFILE TUNING LOCK prevents modifying any reflow parameters, but allows users to select different
profile schedules.
NOTE: The SYSTEM SECURITY LOCKS prevent keypad actions. When SYSTEM SECURITY LOCKS are
active, inputs received through the Profile Binary Inputs and Serial Ports will still be executed.
COPY PROFILE
On the SETUP MENU screen, the 5 key
will bring up the COPY PROFILE screen.
This screen allows you to copy the
current or a different heat profile to
another heat profile.
Use the cursor key to advance from the
COPY PROFILE field to the TO PROFILE
field.
< COPY PROFILE >
COPY PROFILE [ 2] TO PROFILE [ 4]
Enter NUMBERS followed by the arrow
Use Graph or Setup to abort
If you press the GRAPH, COUNTERS, or HEATING RATE keys during entry of a password, this function
will be aborted.
In the COPY PROFILE screen shown, for example, Profile 2 will be copied to Profile 4 when you press the
right cursor key to exit the
COPY PROFILE screen.