Amada UNIFLOW 4 REMOTE - Page 158

APPENDIX D: COMMUNICATION CODES
UNIFLOW
®
4 PULSED HEAT CONTROL
D-20 990-908
Relays2.on_off (As above) 1 Byte
Relays2.when (As above) 2 Byte
, 1 Byte
Relays3.on_off (As above) 1 Byte
, 1 Byte
Relays3.when (As above) 2 Byte
, 1 Byte
Relays4.on_off (As above) 1 Byte
, 1 Byte
Relays4.when (As above) 2 Byte
, 1 Byte
Relays5.on_off (As above) 1 Byte
, 1 Byte
Relays5.when (As above) 2 Byte
, 1 Byte
Relays6.on_off (As above) 1 Byte
, 1 Byte
Relays6.when (As above) 2 Byte
, 1 Byte
Relays7.on_off (As above) 1 Byte
, 1 Byte
Relays7.when (As above) 2 Byte
34 Bytes Total
REPORT “RR” Read (Reports the results of the last reflow. Sent automatically by the Control at the
end of the reflow.)
ProfileNum (Profile number: 01 – 63) 2 Bytes
, 1 Byte
StartTemp (Starting Temperature: 000 – 999) 3 Bytes
, 1 Byte
PeakTemp (Peak Reflow Temperature: 000 – 999) 3 Bytes
, 1 Byte
FinalTemp (Final Reflow Temperature: 000 – 999) 3 Bytes
, 1 Byte
AverageTemp (Average Reflow Temperature: 000 – 999) 3 Bytes
, 1 Byte
Cool1Time (Actual Cool1 time: 000 – 999) 3 Bytes
, 1 Byte
Cool2Time (Actual Cool2 time: 000 – 999) 3 Bytes
, 1 Byte
PeakPreheatTemp (Peak Preheat Temperature: 000 – 999) 3 Bytes
, 1 Byte
AveragePreheatTemp (Average Preheat Temperature: 000 – 999) 3 Bytes
, 1 Byte
AuxPeakTemp (Aux Peak Reflow Temperature: 000 – 999) 3 Bytes
, 1 Byte
AuxAverageTemp (Aux Average Reflow Temperature: 000 – 999) 3 Bytes
, 1 Byte
AuxPeakPreheatTemp (Aux Peak Preheat Temperature: 000 – 999) 3 Bytes
, 1 Byte
AuxAveragePreheatTemp (Aux Average Preheat Temperature: 000 – 999) 3 Bytes
, 1 Byte