CHAPTER 5: MAINTENANCE
UNIFLOW
®
4 PULSED HEAT CONTROL
5-2 990-908
Message Description
Postheat – Head Up
The Control is operating in the Postheat Time period after the Head Up time
has passed.
Postheat – Head Up Delay
The Control is operating in the Postheat Time period but the Head up Delay
time has not been reached yet.
Reflow Time The Control is operating in the Reflow Time period
Rise1 Time The Control is operating in the Rise1 Time period
Rise2 Time The Control is operating in the Rise2 Time period
System Ready The Control is ready to begin a reflow process cycle.
System Ready, PROCESS WARNING
The Control is ready to begin a reflow process cycle. A temperature was
Out Of Limits or Envelope during the previous process.
System Ready WARNING! IDLE
HEAT ON
The Control is ready to begin a reflow process cycle. Idle Heat has been set
to On.
Warm Up in Progress – Please Wait The system is ramping up to the Idle temperature.
To Next Page
Loading...