a WARNING
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the dryer before servicing.
• Close gas shut-off valve to gas dryer before servicing.
• Never start the dryer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the dryer is properly grounded.
W001
15
RS3200001 (502992R3)
Figure 9
14.LINT FILTER (Figure 9)
a. Open loading door.
b. Remove lint filter screws.
c. Lift lint filter cover out of lint filter.
d. Lift lint filter out of air duct.
a WARNING
When installing lint filter, be sure to
install the filter with the word “FRONT”
facing the front of the dryer. If filter
is installed backwards, lint will
accumulate in exhaust system,
increasing the risk of fire and machine
malfunction.
To Next Page
Loading...
