Amana LE8217*2 - Timer Contract Points

a WARNING
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the dryer before servicing.
• Close gas shut-off valve to gas dryer before servicing.
• Never start the dryer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the dryer is properly grounded.
W001
90
RS3200001 (502992R3)
Rev. 3
93.TIMER CONTACT POINTS.
Figure 66
CIRCUIT TO BE TESTED CONTACTS
Timer Motor L1 and M
Main Motor L1 and M
Signal Control S and BZ
Auto Regular DC and C
Auto Perm Press DC and B
Auto Delicate DC & B & C
Cool-Down DC & A
Time Dry
DC & A & B
Push-to-Start M and S
Figure 67