Amana LE8217*2 - Nameplate Location; Model Identification

a WARNING
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the dryer before servicing.
• Close gas shut-off valve to gas dryer before servicing.
• Never start the dryer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the dryer is properly grounded.
W001
4
RS3200001 (502992R3)
Rev. 3
Nameplate Location
Model Identification
Information in this manual is applicable to these dryer models:
P. Painted
S.S. Stainless Steel
U.P. Unpainted
Model
Number
Manufacturing
Number
Timer
Model
Electronic
Model
Cylinder
Electric
Heat
Gas
Heat
Moisture
Sensor
CE4317L2 PCE4317L2 X P. X
CE4317W2 PCE4317W2 X P. X
CE8317W2 PCE8317W2 X P. X
CE8407W2 PCE8407W2 X P. X
CE8517W2 PCE8517W2 X S.S. X
CE9207W2 PCE9207W2 X S.S. X X
CG8409W2 PCG8409W2 X P. X
LE4207L2 PLE4207L2 X P. X
LE4217*2 PLE4217*2 X P. X
LE4207W2 PLE4207W2 X P. X
LE4317L2 PLE4317L2 X P. X
LE7101LB PLE7101LB X P. X
LE7101WB PLE7101WB X P. X
LE7111LB PLE7111LB X P. X
LE7111LM PLE7111LM X P. X
LE7111WB PLE7111WB X P. X
LE7111WM PLE7111WM X P. X
LE7121LM PLE7121LM X P. X
LE7121WM PLE7121WM X P. X
LE7153LB PLE7153LB X S.S. X
LE7153LM PLE7153LM X S.S. X
LE7153WB PLE7153WB X S.S. X
LE7153WM PLE7153WM X S.S. X
LE7163LM PLE7163LM X S.S. X
LE7163WM PLE7163WM X S.S. X
LE8107*2 PLE8107*2 X U.P. X
LE8207*2 PLE8207*2 X P. X
LE8207*3 PLE8207*3 X P. X
LE8217*2 PLE8217*2 X P. X
LE8317L2 PLE8317L2 X P. X
LE8317W2 PLE8317W2 X P. X