Amana LE8217*2 - From Rear Bulkhead to Timer Mounting Bracket to Dryer Cabinet Top; Timer Mounting Bracket to Graphic Panel; Bracket to Dryer Cabinet Top Timer Mounting Bracket to Graphic Panel; From Rear Bulkhead to Dryer Cabinet Top to Electronic Control to Graphic Panel

a WARNING
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the dryer before servicing.
• Close gas shut-off valve to gas dryer before servicing.
• Never start the dryer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the dryer is properly grounded.
W001
8
RS3200001 (502992R3)
Rev. 3
Figure 4
4. FROM REAR BULKHEAD TO TIMER MOUNTING BRACKET TO DRYER CABINET TOP. TIMER
MOUNTING BRACKET TO GRAPHIC PANEL (Mechanical Timer Model Dryers — Figure 4).
FROM REAR BULKHEAD TO DRYER CABINET TOP TO ELECTRONIC CONTROL TO GRAPHICS
PANEL (Electronic Control Model Dryers — Figure 4).