USER MANUAL
817NG
WARNINGS
7845282-06 03/20
subject to change without notice
- The working area must be big enough to contain the tool when operating at the maximum opening
(Db < A).
- Only use the crane to lift free loads. Do NOT press objects or material with the tool.
- Release the load as close to the ground or container as possible. Do NOT overload the tool.
- Take care that the load does not fall accidentally. Do NOT operate the tool over areas where
accidental fall of the load may cause damage to property and injury to persons.
- Before performing maintenance rest the equipment on the ground, switch OFF the machine,
disconnect the control panel from the power supply and wait for the oil to cool for at least 2 hours.
To Next Page
