USER MANUAL
817NG
WARNINGS
7845282-06 03/20
subject to change without notice
- Do NOT place lower limbs between the stabiliser legs and the vehicle. Do NOT place hands near
the stabiliser extensions during retraction.
- Do NOT perform maintenance when the crane is moving or when the power take-off is enabled.
Do NOT touch the crane when it is moving.
- Abide by safety distances indicated in EN 349 and make sure all others do the same.
A.2.3 CUTTING HAZARD
Residual hazard associated with movement of booms and connecting rods. A residual cutting
hazard exists for the upper limbs between moving parts associated with the booms, base and
telescopic components.
WARNINGS
- When the crane is working, do NOT place upper limbs between the boom joints, near connecting
rods or in the area where the stabiliser extensions are retracted into the base. Do NOT insert
fingers, feet or limbs inside openings on moving parts.
- Do NOT stand between the base and booms during crane folding.
To Next Page
Loading...
