Amco Veba 817NG - How to Deploy the Automatic Turning Stabilizers

USER MANUAL
817NG
USE
B.34
7845282-06 03/20
subject
to change without notice
B.7.6 HOW TO DEPLOY THE AUTOMATIC TURNING STABILIZERS
LOCKING DEVICES OF STABILIZER EXTENSIONS
1
Automatic lock of stabilizer extension
2
Lock support
3
Locking device of stabilizer leg
Operating the crane is allowed only when the stabilizers are deployed correctly.
Always use the controls on the side on which you are operating the crane.
Perform the following procedure on the control valve side:
1) Retract fully the stabilizer cylinder and then the stabilizer extension.