EasyManuals Logo

Ametek 888 User Manual

Ametek 888
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
2-2 | Model 888 ATEX IECEx Tail Gas Analyzer
Communication
Local User
Interface
AMEVision; 4.2” LCD color, 1/4 VGA display; 19-key
piezoelectric keypad (suitable for use with a gloved
hand)
Analog Outputs
Four 4 to 20mA analog outputs are electronically
isolated from the controller, but not each other.
(Self Powered)
Digital Output
System Alarm, Data Valid, and two congurable
digital outputs (30 VAC, 60 VDC, 10 VA, maximum,
resistive load only)
Serial
Communications
RS-485 serial communication; Modbus RTU; two-
wire half duplex; 9600 baud. Modbus query rate lim-
ited to 30 queries per second. Modbus TCP supports
a single TCP master.
Ethernet
Fast Ethernet; 100 Mbit/s. Modbus query rate limited
to 30 queries per second. Modbus TCP supports a
single TCP master.
USB Connectivity USB 2.0
Remote Input One (1) digital input (user congurable)
Purge Alarm
Rating: 2 Amps, 240 VAC Resistive
Alarm Connection: Loss of Purge Pressure; Form C
Contact
Environmental
Conditions
Ambient Temperature Limit
-20° to +60°C ( -4° to +140°F )
The analyzer must be shaded from direct sunlight.
Enclosures
Electronics and oven enclosures, backplate, and
keypad are 316 stainless steel.
Customer connection enclosure is made from cast
aluminum.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ametek 888 and is the answer not in the manual?

Ametek 888 Specifications

General IconGeneral
BrandAmetek
Model888
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals