Ametek PARSTAT MC - Ir Compensation; Potential;Current Control; Impedance Specifications, Available on PMC-1000

PARSTAT MC Hardware Manual
PARSTAT MC Hardware Manual 55
 4 nA: <0.5% ±20 pA4nA and 20nA ranges, <5% + 50 pA
5.1.8. iR Compensation
Positive Feedback Range: 50 MΩ to 5 Ω depending on current range
Dynamic iR : 2s/pt rate limit (limited to Corrosion techniques)
5.1.9. Potential/Current Control
Digital/Analog Converters (DACs)
Bias DAC
Resolution 16 bits
Range (potentiostat) + 10V
Range (galvanostat) + 100% of full-scale current
Modulation DAC
Resolution 16 bits
Range (potentiostat) + 10V
Range (galvanostat) + 100%
5.1.10. Impedance Specifications, available on PMC-1000
Frequency Range 10 μHz – 1 MHz
Maximum AC Voltage Amplitude 1000mV RMS
Minimum AC Voltage Amplitude 0.1mV RMS