Ametek Sorensen SG Series - Page 148

SCPI Status Implementation SG Series Programming
Index-2 M550129-03 Rev L
Ethernet, 5-10
External User Control Signal Connector
SHUTDOWN input signal, 5-11
External User Control Signal Connector
TRIGGER IN input signal, 5-11
External User Control Signal Connector
Warning, 5-12
F
Features
Ethernet, 4-2
IEEE 488.2 GPIB/RS232, 2-1
Functions, 2-2
IEEE 488.2 GPIB/RS232, Readback, 2-2
IEEE 488.2/GPIB/RS232, Programmable, 2-1
Programmable, Ethernet, 4-2
Readback, Ethernet, 4-3
G
Global Channel 0, 3-8
H
HTRIGGER SCPI Command Reference, 6-25
I
IEEE 488.2 GPIB/RS232 Configurations and
Remote Programming, 3-1
IEEE 488.2 GPIB/RS232/Ethernet and SCPI
Command Operation, 6-1
IEEE-488.2 Common Command Subsystem, 6-
10
*CLS, 6-10
*ESE, 6-10
*ESR?, 6-10
*IDN?, 6-10
*OPC, 6-10
*RST, 6-10
*SRE, 6-11
*STB?, 6-11
*TST?, 6-11
*WAI, 6-11
L
Local Operation, 3-6, 5-9
M
MEASURE SCPI Command Reference, 6-17
MEASURE SCPI Command Subsystem, 6-17
N
Network Setup Procedure
Auto-IP, 5-5
DHCP, 5-4
Serial COM Port, 5-6
Web Browser, 5-7
O
Operation Status and Questionable Status
Registers, 6-5
OUTPUT SCPI Command Reference, 6-18
OUTPUT SCPI Command Subsystem, 6-18
P
Parameter Definitions, 6-8
boolean, 6-8
NR1, 6-8
NRf, 6-8
string, 6-8
Permissions
Add New User, 5-31
Edit Existing User, 5-32
Power-On Conditions
Default, 5-10
Default, GPIB, 3-7
Programming
accuracy, Ethernet, 4-4
resolution, Ethernet, 4-4
Programming Accuracy
IEEE 488.2 GPIB/RS232, 2-2
Programming Resolution
IEEE 488.2 GPIB/RS232, 2-2
Programming/Communication via Ethernet, 5-13
Raw Socket Interface, 5-13
Web Server, 5-13
Protection Event Status Register, 6-3
Q
Queries, 6-9
R
Ramp Funciton, 6-16
Ramping
Description, 6-16, 6-25
Readback
accuracy, Ethernet, 4-5
resolution, Ethernet, 4-4
Readback Accuracy
IEEE 488.2 GPIB/RS232, 2-2
Readback Resolution
IEEE 488.2 GPIB/RS232, 2-2