Remote Operation
M370430-01 Rev B 5-11
9. In the Locate Driver Files dialog box, in the field Optional
Search Locations, select Specify A Location and click Next.
10. On the next screen, enter the file path “C:\FTDI” and click
OK.
11. On the next screen, select “Driver Files Search Results” and
click Next.
12. In Completing the Found New Hardware Wizard, see Figure
5-9, click Finish to complete the installation.
Figure 5-9 Completing the New Hardware Wizard
This completes the first part of the installation during which the USB to
serial converter is installed. The second part involves the installation of
a serial port, which should follow automatically once the converter
installation is complete. Installation of the serial port does not require
any user intervention.
Verifying Installation
Once the installation of the serial port has completed, verify that the
installation has been successful by looking under Device Manager of the
System Properties screen. The device should have installed as a USB
Serial Port (COMx) attached to USB High Speed Serial Converter.
To Next Page
Loading...
Need help?
General
