Communications Options
6-50 M370430-01 Rev B
To use the CONFIGURATION menu, press the MENU and use
the up/down error keys to display the CONFIGURATION entry.
Place the pointer on CONFIGURATION and press the ENTER
key. Then scroll down until you see LANetwork and press ENTER
again.
The following fields are available in the LANetwork menu:
Setting LAN Parameters via Web Interface
Follow the instructions in the section on CONNECTING TO A
NETWORK in this chapter to reach the Web page interface. Click
on the Configuration tab. This should bring up the following page.
By default the user name and password are both “admin”. Entering
admin in both fields will bring up the IP Address Configuration
page (see next):
To Next Page
Loading...
Need help?
General
