Rack Mount Options and Installation Instructions
D-2 M370430-01 Rev B
Rack Mount Kit Options
Table 7-1describes the options available for rack mounting the power supply and provides the
part numbers for each option.
Table 7-1 Rack Mount Options
Option A: Rack Mount with Rails
Option B: Rack Mount with Slides
RM-S-XG2 (Fig D-1, left) and RM-XG2
RM-S-XG2 (Table 7-2, page D-7)
RM-D-XG2 (Fig D-1, right) and RM-XG2
RM-D-XG2 (Table 7-2, page D-7)
RM-S-XTR2 (Fig D-1, left) and RM-XTR2
RM-S-XTR2 (Table 7-2, page D-7)
RM-D-XTR2 (Fig D-1, right) and RM-XTR2
RM-D-XTR2 (Table 7-2, page D-7)
XG/XTR Single (Half Rack) and Dual (Full Rack)
Figure shows the rack mount kit options for installing the XG/XTR into a half rack and a full
rack. Note that the 850 Watt units are the only units that can be installed in either; all other units
can be installed in the half rack only.
Figure D-1 Single (left,) and Dual (right) Half Rack Mount Kit Options
To Next Page
Loading...
