Ametek Sorensen XTR - SCPI Commands to Clear All Protection Mechanisms

M370430-01 Rev B
A-21
A
SCPI Command Reference
Table A-4 SCPI Commands for Calibration (Continued)
Calibrate the
Resistive
controlled
Isolated
Current APG
feature
[:]CALibration[<channel>]:OUTPut :ANAL
og:CURRent:RESistive:ISOLated
Calibrates the Resistive
controlled current analog
programming system.
? | <NR1> | <nothing
for interactive mode>
Yes
Get Input
Calibration
Parameters
[:]CALibration[<channel>]:PARameter
[:INPut]
Queries and loads the input
calibration parameters in
arbitrary program block data
format.
?|<arbitrary program
block data>
Yes
Get Output
Calibration
Parameters
[:]CALibration[<channel>]:PARameter
[:OUTPut]
Queries and loads the output
calibration parameters in
arbitrary program block data
format.
?|<arbitrary program
block data>
Yes
Get Analog
Programming
Calibration
Parameters
[:]CALibration[<channel>]:PARameter :A
PRogram
Queries and loads the APG
calibration parameters in
arbitrary program block data
format.
?|<arbitrary program
block data>
Yes
Table A-5 SCPI Commands to Clear All Protection Mechanisms
Function
SCPI Command
Description
Parameter and
Range
Query
Clear Output
Protection
[:]OUTPut[<channel>]:PROTection:CLEar
Clears the currently set
alarms.
N/A