Ametek Sorensen XTR - Page 162

Remote Operation
5-28 M370430-01 Rev B
Multichannel commands are particularly useful for configuring
groups of devices that require identical configurations.
The SCPI Commands for these instructions are:
[:]<root command> <ALL|addr1>[,[ ]<addr2>][,[
]<addr3>][,...]:<command> <parameter>
For example:
sour 1, 2, 3, 7:volt 4.5
syst4,5,6:oper:enab 255
syst ALL:clear
output0:stat on