Communications Options
M370430-01 Rev B 6-63
SYSTem:COMMunicate:LAN:HOST
This command will set the Host name. The name is limited to 16 characters
Command Syntax SYSTem:COMMunicate:LAN:HOST <SRD>
Parameters <SRD>
Example SYST:COMM:LAN:HOST “ACS”
Query Syntax SYST:COMM:LAN:HOST?
Returned Parameters <SRD>
SYSTem:COMMunicate:LAN:PASSword
This command will set the user password. The password is used to access to LAN
configuration screen from the Web page. The default password is “admin”. The
description is limited to 8 characters.
Command Syntax SYSTem:COMMunicate:LAN:PASSword <SRD>
Parameters <SRD>
Example SYST:COMM:LAN:PASS “admin”
Query Syntax SYST:COMM:LAN:PASS?
Returned Parameters <SRD>
SYSTem:COMMunicate:LAN:PORT
This command will set the socket port number. The query format returns the port
number set. The default value is 5025.
Command Syntax SYSTem:COMMunicate:LAN:PORT<NRF>
Parameters 0- 65535
Example SYST:COMM:LAN:PORT 5025
Query Syntax SYST:COMM:LAN: PORT?
Returned Parameters <NR1>
SYSTem:COMMunicate:LAN:MACAddress
This command allows for reading out the MAC address. This command can only be
used to query the MAC address. The MAC address is set at the factory and may not
be changed.
Command Syntax SYSTem:COMMunicate:LAN:MACAddress
Parameters None
Example SYST:COMM:LAN:MACA?
Query Syntax SYST:COMM:LAN:MACA?
Returned Parameters <SRD>
To Next Page
Loading...
