Ametek Sorensen XTR - System Commands; Set the menu system timeout; Resets the Instrument to default values; Query System Error

A-24
M370430-01 Rev B
SCPI Command Reference
Table A-9 System Commands
Function
SCPI Command
Description
Parameter and
Range
Query
Set the menu
system
timeout
[:]SYSTem:FPANel[:TIMeout]
Sets the menu system
timeout.
<1–20 to one decimal
place seconds>
Yes
Resets the
Instrument to
default values.
[:]SYSTem[<channel>]:RESet
Resets all values to default
state (excluding calibration
data).
N/A
Wa it t o
Continue
[:]SYSTem[<channel>]:WAIT
Wait to continue command.
N/A
Self Test
[:]SYSTem[<channel>]:TEST?
Perform unit Self test,
returns 0 if pass, non zero
value for failure.
Yes
ID Query
[:]SYSTem[<channel>]:IDENtify
Query device ID string.
Yes
Save User
Preset
[:]SYSTem[<channel>]:SAVE
Save the user preset values.
Select any slot from 0-3.
<Setting Index (0-3)>
No
Recall User
Preset
(previously
saved)
[:]SYSTem[<channel>]:RECall
Load the user preset values.
Select any slot from 0-3.
<Setting Index (0-3)>
No
Query System
Error
[:]SYSTem[<channel>]:ERRor[:NEXT]?
Returns the next error in the
instrument’s error queue
Yes
Query System
Error Code
[:]SYSTem[<channel>]:ERRor:CODE[:NEXT]
?
Returns the error code only
for the next error in the
instrument’s error queue.
Yes