M370430-01 Rev B iii
About This Manual (firmware v2.0 and higher)
The Operating Manual provides installation and operating information for
the XG and XTR Family Programmable DC Power Supply.
The Manual provides safety information, features and specifications,
installation procedures, functional test procedures, and operating
procedures for both local (front panel) operation and remote operation.
The Manual also provides information on the GPIB interface option and LXI
compliant Ethernet (ENET) interface for models with the MEB and MEA
options.
The Manual is intended for the user who is familiar with electronic power
supplies, Constant Voltage, Constant Current, and/or Constant Power
operating modes, and the control of output power. The user should be
familiar with practicing safe techniques while making supply or pin
connections.
The following conventions are used in this guide.
WARNING
Warnings identify conditions or practices that could result in personal injury or
loss of life.
CAUTION
Cautions identify conditions or practices that could result in damage to the unit
or other equipment.
Important: Important notes provide information that is important for you to
know. They are not as serious as Warnings or Cautions.
To Next Page
Loading...
Need help?
General
