102 ARX 4
1208531 | 03.07.2012
9.11 Emptying the water tank
9.11.1 Cleaning accessories
Clean the following parts as required:
● Water tank with filler strainer
● Water filter
● Sprinkler pipes with nozzles
9.11.2 Emptying the water tank
1 Unscrew the screw plug (1) of the water drain with a wrench (size 32).
2 Drain off the water.
Fig. 9-21 Water drain
NOTE In the event of the risk of frost, additionally empty the sprinkler system. See
Section Winterization (risk of freezing), Page 126
9.12 Coolant
A coolant antifreeze mixture for up to -25° is provided upon delivery from the factory.
For temperatures colder than -25°, the fluid must be replaced by a suitable coolant
antifreeze mixture.
9.12.1 Checking coolant level
1 Check coolant level every day.
1.1 Check oil level while the roller is standing on a level surface and the
engine is cold.
1.2 You can read off the level of coolant on the expansion tank display.
The water level must be between the top (FULL) and bottom (LOW)
marks.
2* Top up coolant as required.
To Next Page
Loading...
