Need help?Do you have a question about the Ampac EvacU and is the answer not in the manual?
General| Brand | Ampac |
|---|---|
| Model | EvacU |
| Category | Security System |
| Language | English |
Provides an overview of the manual's content and scope for the EWCIE system.
Lists relevant standards, such as AS 4428.16:2015, for system compliance.
Explains the meaning of common symbols used throughout the technical manual.
Details the mandatory and optional functions of the EWCIE in compliance with AS4428.16.
Technical specifications for 25W, 50W, 120W, 250W, and 500W amplifiers.
Details the various connection terminals and ports on the front panel module.
Explains the configuration options available via the 4-way DIP switch.
Describes the function and status of each indicator light on the front panel.
Outlines access levels and operational controls like PTT and Silence Buzzer.
Lists the terminals and their functions for connecting a Remote Paging Console.
Explains the configuration and function of the amplifier's digital inputs.
Details the system's relay outputs, strobe, and 100V audio line outputs.
Covers the configuration options for amplifier address and communication.
Describes amplifier status LEDs and the volume adjustment controls.
Outlines the features and capabilities of the Tone Generator board.
Explains the module's connectors and its status indicators and controls.
Details the ALS's LEDs, inputs, relay output, and audio line outputs.
Explains the DIP switch configurations for the Audio Line Splitter.
Describes the indicators and operational buttons of the 8 Zone RPC.
Provides instructions for connecting the Remote Paging Console to the amplifier.
Details the physical cabinet features and instructions for its installation.
Illustrates the internal component layouts for standalone panels.
Covers the specifications for the 3 Amp, 5 Amp, and 10 Amp PSU options.
Explains PSU fault outputs, LED indications, and diagnostic tables.
Details how to interface the EWCIE with FireFinder and FireFinder Plus systems.
Describes EWCIE integration with LoopSense and ZoneSense Plus panels.
Explains how to set up multiple amplifiers with various fire panel types.
Details the process of interfacing with Evactron LMU4 units.
Guides on using the FireFinder PLUS ConfigManager for EWCIE setup.
Explains how to configure the EWCIE using the LoopMaster software.
Introduces the EvacUwiz tool for programming and configuration of Evac-U series devices.
Provides recommended daily, monthly, quarterly, and annual maintenance tasks.
Offers solutions for common problems like power faults and system faults.
Lists manufacturer information and compliance certifications for the EWCIE.
To Next Page
