Ampac ZoneSense Plus - Reset Terminal; Buzzer Output. TB12;3

MAN 2326-13
21
6.10.4 Reset Terminal / Buzzer Output. TB12/3
An output rated at 24VDC @ 100mA that can be congured to the user’s requirement to provide
either of the following 2 funcons:
1. Reset.
Reset is used to reset eld devices such as beam detectors that is Reset switches negave for a period
of 3 seconds on operaon of the “Reset” buon.
2. Buzzer.
Buzzer is connected to an external Buzzer which will sound at the same me as the internal panel
buzzer. The output is protected against transient voltages.