Ampac ZoneSense Plus - About This Manual; Purpose and Scope

MAN 2326-13
5
1 About This Manual
1.1 Purpose
This manual is an instruconal tool for the installaon, commissioning, programming /
reprogramming and operaon of the ZoneSense PLUS Fire Alarm Control Panel (FACP).
1.2 Scope
The informaon within this manual is only available to and for the use of personnel engaged in the
installaon and operaon of the ZoneSense PLUS FACP.
ZoneSense PLUS has been designed to comply with major world standards. To ensure these standards
are not compromised in any way installaon sta and operators should;
1. Be qualied and trained for the task/s they undertake;
2. Be aware this manual should be read prior to the installaon and commissioning of the
ZoneSense PLUS FACP;
3. Observe an-stac pre-cauons at all mes; and
4. If a problem is encountered or there is any doubt with respect to the operaonal parameters
of the installaon the supplier should be contacted.
Note: It is strongly recommended that all front panel changes and or programming be
appropriately recorded.
1.3 References
ZoneSense PLUS Technical Manual
ZoneSense PLUS Programming Manual
Apollo Detector / Device Manuals
Ampac Product Data Sheets
Brish Standard: BS 5839
European Standard: EN54 Parts 2 & 4
Figure 1: Examples of the ABS (BX1) and Metal (BX10) Cabinets